Zig-zagCylinder bed zig-zag

SEWPRO 2630D

Cylinder bed walking foot zig-zag with direct drive

A cylinder bed walking foot zig-zag with a direct drive needle positioning motor, for neoprene, boots, leather and canvas.

5.0 on Google from 10 reviews of SEWPRO

Stitch length5mm
Zig-zag width8mm
Thread sizes46-138
Foot lift12mm

Materials

Neoprene
Leather
Boots
Tarpaulins
Canvas
Vinyl

Price

Built to your order

Configured for your work and quoted complete. You pay for what your job needs and nothing it doesn't. Why no list price?

Request a quote (717) 940-0129

Set up, timed and test-sewn on your material before delivery
1 year warranty on parts and workmanship
Delivered and installed in PA and nearby, freight nationwide
Phone and text support from the people who sold it

About the 2630D

The 2630D is a single needle cylinder bed zig-zag with drop feed and a walking foot, for medium to heavy material that is hard to feed: wetsuits and neoprene, leather, boots, tarpaulins, canvas and vinyl. Tubular and curved work slides over the arm, and the seam runs around it with up to an 8mm zig-zag or a 5mm straight stitch.

The rotary hook takes a large bobbin, the foot lifts 12mm and reverse is built in. The motor is a 750W direct drive with needle positioning on 110V, so the needle stops down to hold the work while you turn it, and there is no belt to adjust. It runs 135x17 needles from 110 to 160 with 46 to 138 thread at up to 1,800 RPM.

Technical data: SEWPRO 2630D

Specifications

Specifications can change between production runs. Confirm the numbers that matter for your work when you order.

Machine Type	Cylinder Bed, Single Needle, Drop Feed, Walking Foot, Zig-Zag Lockstitch
Hook Type	Rotary Hook, Large Bobbin
Reverse	Yes
Motor	Direct Drive with Needle Positioning, 750W 110V
Max Speed	1800 RPM
Max Stitch Length	5mm
Zig-Zag Stitch Width Max	8mm
Max Foot Lift	12mm
Needle	135×17 sizes 110-160
Thread Sizes	46-138

Included in a SEWPRO quote

Head, table and stand
Motor options to suit your work: servo, needle positioner, speed reducer
Feet set, folders, clamps or guides for your product
A 10-pack of Schmetz needles in the right system, point and size
Tested on your material before delivery
Delivery and installation in PA and nearby, freight elsewhere
1 year warranty, phone support for the life of the machine

Authorized Schmetz dealer

Needles at dealer prices

This machine takes Schmetz 135×17, sizes 110 to 160. We stock it in round and leather points in 10-packs, and the first 10-pack goes out with the machine.

Needles and prices (717) 940-0129

Industries

Features

What is on the machine

Cylinder bedSews curved and tubular items.
Drop feed and walking footFeeds difficult, layered and grippy fabrics.
Direct drive with needle positioningNeedle stops up or down, 110V.

Compare

2630D against the alternatives

The models we would put next to it on the phone, and why.

SEWPRO 2150-CBZ
Cylinder bed zig-zag with a separate servo motor and 2,000 RPM.
SEWPRO 2652D
The same kind of zig-zag on a 7 inch post bed.
SEWPRO 2156
Feed-off-the-arm zig-zag for neoprene and stretch.

Model	SEWPRO 2630DThis machine	SEWPRO 2150-CBZHeavy-duty zig-zag lockstitch with large bobbin	SEWPRO 2652DPost bed walking foot zig-zag with direct drive	SEWPRO 2156Feed-off-the-arm top and bottom feed zig-zag machine
Stitch length	5mm	5mm	5mm	5mm
Foot lift	12mm	12mm	12mm	10mm
Thread sizes	46-138	46-138	46-138	On request
Needle system	135×17 sizes 110-160	135×17 sizes 110-160	135×17 sizes 110-160	135 x 17 (sizes 110-160)
Max speed	1800 RPM	2000 RPM	2000 SPM	2500 S.P.M
Hook	Rotary Hook, Large Bobbin	On request	Large Rotary Hook and Bobbin	On request
Arm / post / field	On request	2.75"	7"	55mm

Questions about the 2630D

2630D or 2150-CBZ?

Both are cylinder bed walking foot zig-zags with an 8mm bite. The 2630D has a direct drive with needle positioning built in, on 110V; the 2150-CBZ runs a separate servo motor.

Does it run on household power?

Yes. The direct drive motor is 750W on 110V.

Why is there no price for the 2630D?

Every SEWPRO machine is built to order. The same head leaves the shop with a different motor, table, feet, folder, binder, clamp or puller depending on what you sew, and we set it up and test-sew it on your material before it is delivered. A list price would do one of two things: include parts you will never use, so you overpay, or leave out the ones your job needs, so the number means nothing. Tell us the material, the thread and the product, and we quote the machine configured for that work. Everything it needs, nothing it doesn't, and the price you see is the price you pay.

Request a quote

SEWPRO 2630D

Tell us the material, how thick the stack gets, the thread you run and what you make. We will confirm the 2630D fits or point you to the model that does, then quote it complete with a delivery date.