Zig-zagPost bed zig-zag

SEWPRO 2652D

Post bed walking foot zig-zag with direct drive

A 7 inch post bed walking foot zig-zag with a large rotary hook and direct drive, for boots, wetsuits, leather and canvas.

5.0 on Google from 10 reviews of SEWPRO

Post height7"
Stitch length5mm
Zig-zag width8mm
Thread sizes46-138

Materials

Neoprene
Leather
Boots
Canvas
Vinyl

Price

Built to your order

Configured for your work and quoted complete. You pay for what your job needs and nothing it doesn't. Why no list price?

Request a quote (717) 940-0129

Set up, timed and test-sewn on your material before delivery
1 year warranty on parts and workmanship
Delivered and installed in PA and nearby, freight nationwide
Phone and text support from the people who sold it

About the 2652D

The 2652D is a single needle post bed zig-zag with drop feed and a walking foot. The sewing point sits on a 7 inch post, so boots, gloves, shaped panels and three-dimensional pieces wrap around it while you sew a zig-zag seam up to 8mm wide or a straight stitch up to 5mm.

It is built for medium to heavy material that is difficult to feed: wetsuits, leather, boots, canvas and vinyl. A large rotary hook and bobbin, 12mm foot lift and reverse are standard, and the direct drive servo runs on 110V at up to 2,000 stitches per minute with 135x17 needles from 110 to 160 and 46 to 138 thread.

Technical data: SEWPRO 2652D

Specifications

Specifications can change between production runs. Confirm the numbers that matter for your work when you order.

Machine Type	Post Bed, Single Needle, Drop Feed, Walking Foot, Zig-Zag Lockstitch
Hook Type	Large Rotary Hook and Bobbin
Reverse	Yes
Motor	Direct Drive Servo, 110V
Max Speed	2000 SPM
Max Stitch Length	5mm
Zig-Zag Stitch Width Max	8mm
Max Foot Lift	12mm
Needle	135×17 sizes 110-160
Thread Sizes	46-138
Post Height	7"

Included in a SEWPRO quote

Head, table and stand
Motor options to suit your work: servo, needle positioner, speed reducer
Feet set, folders, clamps or guides for your product
A 10-pack of Schmetz needles in the right system, point and size
Tested on your material before delivery
Delivery and installation in PA and nearby, freight elsewhere
1 year warranty, phone support for the life of the machine

Authorized Schmetz dealer

Needles at dealer prices

This machine takes Schmetz 135×17, sizes 110 to 160. We stock it in round and leather points in 10-packs, and the first 10-pack goes out with the machine.

Needles and prices (717) 940-0129

Industries

Features

What is on the machine

Post bedThe sewing point is raised so boots, gloves and shaped pieces wrap around it.
Drop feed and walking foot zig-zagFlexible seams in grippy and layered material.

Compare

2652D against the alternatives

The models we would put next to it on the phone, and why.

SEWPRO 2630D
Cylinder bed version of the same zig-zag.
SEWPRO 1710D
Straight stitch post bed with triple feed for leather topstitching.
SEWPRO 2150-CBZ
Cylinder bed zig-zag with a separate servo.

Model	SEWPRO 2652DThis machine	SEWPRO 2630DCylinder bed walking foot zig-zag with direct drive	SEWPRO 1710DPost-Bed Lockstitch Sewing Machine with Direct Drive	SEWPRO 2150-CBZHeavy-duty zig-zag lockstitch with large bobbin
Stitch length	5mm	5mm	8mm	5mm
Foot lift	12mm	12mm	14mm (Pneumatic)	12mm
Thread sizes	46-138	46-138	46-138	46-138
Needle system	135×17 sizes 110-160	135×17 sizes 110-160	135×17 (Sizes 110-160)	135×17 sizes 110-160
Max speed	2000 SPM	1800 RPM	1,800 SPM	2000 RPM
Hook	Large Rotary Hook and Bobbin	Rotary Hook, Large Bobbin	On request	On request
Arm / post / field	7"	On request	7"	2.75"

Questions about the 2652D

Post bed or cylinder bed zig-zag?

A post bed suits pieces that wrap around a raised point, like boot uppers and gloves. A cylinder bed suits tubes and sleeves that slide over the arm. The 2630D is the cylinder bed version.

Why is there no price for the 2652D?

Every SEWPRO machine is built to order. The same head leaves the shop with a different motor, table, feet, folder, binder, clamp or puller depending on what you sew, and we set it up and test-sew it on your material before it is delivered. A list price would do one of two things: include parts you will never use, so you overpay, or leave out the ones your job needs, so the number means nothing. Tell us the material, the thread and the product, and we quote the machine configured for that work. Everything it needs, nothing it doesn't, and the price you see is the price you pay.

Request a quote

SEWPRO 2652D

Tell us the material, how thick the stack gets, the thread you run and what you make. We will confirm the 2652D fits or point you to the model that does, then quote it complete with a delivery date.